Model

Texture of material

Specification parameters

P-pro

440C

US standard, large side opening angle of 140 degrees, overall height of 69.86mm, lower opening angle of 34 degrees, upper opening angle of 30 degrees, central hole of 3.66mm, with 11mm height WC cushion block.

Article No.: hp-1106

pl-pro

440C

US standard, outer diameter 50 mm, low focusing distance, upper and lower hole 5.1 mm, overall height 10 mm, minimum working distance 5 mm, three support / fastening screw design.

Article No.: hp-1107

F-pro

440C

General type, four column DAC, outer diameter 48mm, height 25mm, used for electrical experiments, up and down leads, side electrode thermocouple wiring, angle 90 degrees.

Article No.: hp-1108

B-pro

440C

US standard, 90 degrees up ° The overall height of the center hole is 25.88mm, and the height from the bottom of WC to the side center hole is 5.4mm.

Article No.: hp-1105