Technical description of mpms-23 cell:

1. The material is high strength non-magnetic steel and NiCrAl non-magnetic alloy;

2. The yield strength of the material is more than 1800mpa, and the hardness after treatment is hrc58 ± 1；

3. The processing specification is based on metric specification, equipped with imported metric non-magnetic beryllium copper screw accessories;

4. Machining accuracy requirements: parallelism is better than ± 005, no tolerance indicated ± 0.02, coaxiality 0.003, perpendicularity 0.002, finish - base surface 0.4, end face 0.8; NiCrAl seat, 0.005 parallelism, no tolerance ± 0.02, hardness HRC60;

5. Appearance Matt antirust treatment, independent vacuum packaging;

6. Each set of press accessories: 1 set of high-strength non-magnetic steel base meter top wire;

7. 1 year warranty;

8. The product belongs to customized non-standard products, please adjust according to the specific experimental needs;

9. The schematic diagram of the product is only for reference, not as a technical acceptance index.

Anvil support material: NiCrAl alloy.