Technical description of mpms-24.5 cell:

1. The material is high strength non-magnetic steel and NiCrAl non-magnetic alloy;

2. The yield strength is more than 1800mpa and the hardness is hrc56 ± 1；

3. The processing specification is based on the metric specification, equipped with imported metric non-magnetic beryllium copper screw accessories, or optional non-magnetic alloy screw accessories;

4. Machining accuracy requirements: parallelism is better than ± 005, no tolerance indicated ± 0.02, coaxiality 0.003, perpendicularity 0.002, finish - base surface 0.4, end face 0.8; NiCrAl seat, 0.005 parallelism, no tolerance ± 0.02, hardness HRC60;

5. Appearance Matt antirust treatment, independent vacuum packaging;

6. Each set of press accessories: beryllium copper grade m3 * 20 left and right screw, 2 for each; There are 8 m1.2 top wire base meters, 8 m3 disc springs, 1 protective base meter and 2 WC cushion blocks;

7. The warranty is 1 year.

Anvil support material: NiCrAl alloy;

Pressurization mechanism: bolt disc spring pressurization

Top opening angle: 30 degrees;

DAC height: 32mm

DAC outer diameter: 24.5mm

Working distance: < 15mm

Series products include mpms-6.0; MPMS-8.5； MPMS-17.5； MPMS-20.5； MPMS-24.5.