Technical description of S15 cell:

1. The material is v350 high strength steel with hardness of hrc56 after heat treatment ± 1；；

2. The processing specification is based on the metric specification, equipped with imported metric screw accessories;

3. Machining accuracy requirements: parallelism is better than ± 005, no tolerance indicated ± 0.02, coaxiality 0.003, perpendicularity 0.002, finish - base surface 0.4; WC seat, 0.005 parallelism, no tolerance ± 0.02, hardness hrc90;

4. Appearance Matt antirust treatment, independent vacuum packaging;

5. With Boehler WC block and anvil, the minimum working distance is 7mm;

6. The maximum opening angle can be designed as 120 °； 7. The internal space is enough to place a heating ring with a diameter of 20 mm for experiments at no more than 400 ℃;

Equipped with gasket holder, it is more convenient to pad.

Anvil support material: tungsten carbide;

Pressurization mechanism: bolt disc spring pressurization

Top angle: 120 degrees; Bottom opening angle: 100 degrees

DAC height: < 17mm

DAC outer diameter: 48mm

Working distance: < 8mm

Center height: 4.0 mm; Center aperture: 8.0 mm.