Technical description of s-pro DAC:

1. The material is imported high strength steel with hardness of hrc59 after heat treatment ± 1； The yield strength is greater than 1830mpa and the deformation is less than 0.1%;

2. American standard processing, equipped with imported American screw accessories;

3. Accuracy standard: parallelism better than ± 0.005, no tolerance indicated ±0.02, coaxiality 0.003, perpendicularity 0.002, finish - base surface 0.4, end face 0.8;

4. The assembly surface is specially hardened to increase wear resistance and temperature resistance (not less than 450 ℃);

5. Appearance Matt antirust treatment, independent vacuum packaging;

6. The operation mode is bolt symmetrical manual mechanical pressure mode (left and right);

7. Non magnetic alloys such as titanium alloy and beryllium copper can also be selected, which are suitable for high magnetic field environment;

8. Maximum pressure: 120gpa;

9. Upper and lower opening angle: 60 °/ sixty °； 10. DAC outer diameter: 47.63mm;

11. DAC assembly height: 35.77mm;

12. Working distance (minimum): 17mm;

13. Center height: 6.90mm;

14. The warranty is 1 year.

S-pro DAC accessories:

1. 10-32 compression screw (L / R);

2. 3-48 fasten the top screw;

3. Shell type disc spring;

4. 10-32 protection top wire;

5. Metal gasket;

6. WC cushion block;

7. Diamond anvil.