-
Mobile Version
Scan with Mobile
- Member Center
Symmetric DAC (Sm-I)
This kind of cell is based on S-type DAC and made of high hardness beryllium copper. It is widely used in low temperature, non-magnetic and high voltage scientific research. It can meet the requirements of axial and radial light input, and can carry out the corresponding experiments of optics, X-ray and synchrotron radiation.
Technical description of sm-i cell:
1. The material is imported high strength beryllium copper with hardness of hrc41 after heat treatment ± 1；；
2. The processing specification is based on the metric specification, equipped with imported metric screw accessories;
3.Machining accuracy requirements: parallelism is better than ± 005, no tolerance indicated ± 0.02, coaxiality 0.003, perpendicularity 0.002, finish - base surface 0.4, end face 0.8; WC seat, 0.005 parallelism, no tolerance ± 0.02, hardness hrc90;
4. Appearance Matt antirust treatment, independent vacuum packaging;
5. Each set of press accessories: beryllium copper grade M5 * 25 left and right screw, 2 for each; There are 8 M2.5 top wire base meters, 16 beryllium copper labyrinth disc springs, 1 protective base meter and 2 WC cushion blocks;
6. The warranty is 1 year.
Anvil support material: tungsten carbide;
Pressurization mechanism: bolt disc spring pressurization
Top opening angle: 60 degrees; Bottom opening angle: 60 degrees
DAC height: 35mm
DAC outer diameter: 47.64mm
Working distance: 18mm
Center height: 6.89mm; Center aperture: 6.94mm.
