This product has the following characteristics:

1. Efficiency: Laser drilling is fast and can complete the task of drilling extremely small pores in a short period of time.

2. High precision: After focusing the laser beam, it can provide precise size and shape for the hole.

3. High reliability: Adopting advanced laser technology, stable and reliable, with a long service life.

Product model using 1064nm laser: EM-1064LS-0010.

The product model using a 532nm laser is EM-532LS-0010.

Product model using 355nm laser: EM-355LS-0010.

The laser micro machining system is used for micro machining holes in gasket materials, preparing samples and sample environments for experiments such as diamond anvil slots. The system is based on pulse lasers (fiber lasers and green lasers are optional), with pulse durations ranging from ps to ns that can be customized. A shorter laser pulse duration can eliminate the need for thermal melting of the ablated material, leaving a clean edge after drilling (with appropriate post-processing). Through the tightly focused optical design, this machine can drill holes with diameters as low as nearly 10 microns and larger (in pre pressed thin gaskets, the 300 micron anvil surface corresponds to a target pressure of 30GPa, and the pre pressed thickness is generally within~40 microns, which is empirical data for reference only). The thinner the gasket, the smaller the micro hole taper, and the smaller the aperture can be achieved.

The main technical parameters are as follows:

Sample Room: Four Dimensional Electric (including one set of upper computer software and computer);

Minimum step size:~300 nm (0.3 µ m);

Beam focusing:<10 µ m;

Objective lens WD: customizable;

Working voltage: 220 V, 50-60 Hz;

Size (width, approximately):~45x 60 x 138 cm;

Weight (approximately):~88 kg (including displacement upper computer controller system);

Laser wavelength: 1064nm is selected, mainly used for cutting metal pads; Select 532nm and 355nm, mainly used for cutting boron nitride pads and metal pads;

Repetition frequency: adjustable;

Pulse length: customizable and adjustable;

Short term stability:<1%;

Long term stability: 3%;

Temperature: 20-35 ℃;  

Warranty period: 1 year.